COMP Cams
COMP Cams Pushrod 9.400in Straight 7/16
SKU: cca8641-1
radius, 5/16" ball end. The radii on each end provide additional clearance for the Rocker adjuster at high lift and allow the pushrods to be installed either "up" or "down". The pushrods have a consistent .165" wall thickness, even in the tapered ends, which is thicker, stiffer and stronger than common .080" or .125" wall designs. These pushrods are made in the USA from heat-treated, one-piece chromemoly tubing,...
Shipping ETA may vary. Call or message for specific timing.
Overview
radius, 5/16" ball end. The radii on each end provide additional clearance for the Rocker adjuster at high lift and allow the pushrods to be installed either "up" or "down". The pushrods have a consistent .165" wall thickness, even in the tapered ends, which is thicker, stiffer and stronger than common .080" or .125" wall designs. These pushrods are made in the USA from heat-treated, one-piece chromemoly tubing, which is much stronger than typical 1000 Series Steels and will better handle extreme valve train setups.Single (1) 9.400" Pushrod7/16" diameter offers additional stiffness and higher natural frequency 210˚
Files & media
Similar Items
Detailed rows from our confirmed fitment index can be large (dozens to hundreds per part). Load them only when you need year/trim/engine-level links to Shop by Vehicle.