JKS Manufacturing
JKS Manufacturing Step Drill Bit - 3/16in To 7/8in
SKU: jksJKS1699
If you are serious about off-roading, then you need a JKS step drill bit for drilling and enlarging holes to accept heavy-duty hardware. The 1699 Step Drill Bit will drill holes from 3/16" to 7/8" in 1/16" increments. Thanks to the self-piloting design, you only need a center punch to locate your hole. Made from hardened high-speed steel with a titanium nitride coating and a heavy-duty 3/8" shank. The dual-flute...
Shipping ETA may vary. Call or message for specific timing.
Overview
If you are serious about off-roading, then you need a JKS step drill bit for drilling and enlarging holes to accept heavy-duty hardware. The 1699 Step Drill Bit will drill holes from 3/16" to 7/8" in 1/16" increments. Thanks to the self-piloting design, you only need a center punch to locate your hole. Made from hardened high-speed steel with a titanium nitride coating and a heavy-duty 3/8" shank. The dual-flute design provide fast, smooth cutting. Works well as a deburring tool too. One unique application where we have found ourselves using these bits is to drill out JK knuckle steering arms to accept JSPEC drag link flip.
Features
- Hardened high-speed steel with a titanium nitride coating
- Drill holes from 3/16" to 7/8" in 1/16" increments
- Dual-flute design provide fast, smooth cutting
- Heavy-Duty 3/8" Shank
- Self-piloting
Similar Items
Detailed rows from our confirmed fitment index can be large (dozens to hundreds per part). Load them only when you need year/trim/engine-level links to Shop by Vehicle.