S&S Cycle
S&S Cycle 99-06 Easy Start 551CE Chain Drive Camshaft Kit
SKU: ssc106-5293
551 cams are bolt-in cams for 1999-'06 engines. Cams that exceed the limits of the stock valve springs require the use of special high lift springs. Most S&S cams have higher lift than stock and are designed to take advantage of the extra flow of ported stock heads or S&S Super Stock® heads. Due to the high lift of these cams, S&S adjustable pushrods are recommended. Not all grinds are available in the chain drive...
Shipping ETA may vary. Call or message for specific timing.
Overview
551 cams are bolt-in cams for 1999-'06 engines. Cams that exceed the limits of the stock valve springs require the use of special high lift springs. Most S&S cams have higher lift than stock and are designed to take advantage of the extra flow of ported stock heads or S&S Super Stock® heads. Due to the high lift of these cams, S&S adjustable pushrods are recommended. Not all grinds are available in the chain drive version. To get the best performance from a performance cam installation, a high flow intake and exhaust system is also recommended.
Features
- Designed for engines with 96 to 106 CID and 9:1 to 9:9 compression this is a bolt-in cam set designed for stock or mildly modified touring bikes
- 2005-'06 can use stock valve springs while 1999-'04 will need special valve springs
- Quick installation and Easy Start® Cams allow stock starter to start any engine
- Greatly improves low-end and midrange torque, strongest from idle-4000rpm
- 551 cams are not recommended for compression ratios of 10:1 or greater
- Kit contains cams, gearcover gasket, cam bearings, and instructions
Similar Items
Detailed rows from our confirmed fitment index can be large (dozens to hundreds per part). Load them only when you need year/trim/engine-level links to Shop by Vehicle.